等离子体辅助合成分子筛膜及其催化性能的研究

首次将等离子体技术应用于分子筛膜的制备，研究了以微波等离子体处理基材表面分子筛膜前驱体辅助水热反应合成支撑β型分子筛膜．利用XRD、SEM、XPS、BET、TPD表征了分子筛膜的物相、形貌、孔结构、表面元素组成和表面酸性，并通过甲醇与异丁烯液相反应体系实验考察了分子筛膜的催化性能．结果表明，等离子体处理能有效改善分子筛膜前驱体在基材表面的分散状况，减小了分子筛膜晶体的尺度，使晶体大小均匀，形成的膜致密、牢固．与采用常规方法合成的分子筛膜相比，等离子体辅助合成的分子筛膜对甲醇与异丁烯的反应有更好的催化活件．     

负载PbO催化剂对苯胺与碳酸二甲酯合成苯氨基甲酸甲酯的催化性能

 考察了几种负载PbO催化剂对苯胺(An)与碳酸二甲酯(DMC)反应合成苯氨基甲酸甲酯(MPC)的催化性能. 结果表明, PbO/SiO2对该反应表现出很高的催化活性. 当w(PbO)=3.6%, n(PbO)/n(An)=1%, n(DMC)/n(An)=5, θ=160 ℃和t=4 h时, MPC收率达到99.5%. PbO/SiO2容易从反应体系中分离,且可重复使用5次,催化活性基本保持不变,使用寿命较长.     

Co3O4纳米粒子的固相合成及磁性研究

以Co(NO3)2.6H2O和NaOH为原料,用固相法合成了Co3O4纳米微粒。用XRD和FT-IR研究了反应进程,证明Co3O4在焙烧阶段形成。用TEM观察了Co3O4纳米微粒的形貌,用磁天平测试了其磁性。结果表明,固相法可以制得平均粒径为22 nm的铁磁性Co3O4纳米微粒,属立方晶系,形状为多角形。400℃焙烧2 h所得纳米Co3O4的磁性强度为1.7922×10-2mT-1。     

集成微管路离子选择电极功能块研究

本文对微型管状离子选择电极在流动条件下的电化学特征进行了研究,并设计了新的集成微管路离子选择以电极功能块。用此微型装置测定了土壤、血清、水和药物中的K~+、Na~+、pH、Cl~-、F~-、阿托品、东茛菪碱,并和各种标准方法作了比较,获得满意分析结果。     

A Minor New Flavone from Scutellaria baicalensis Georgi

A new flavone,6,2′-dihydroxy-5,7,8,6′-tetramethoxyflavone,was isolated from the roots of Scutellaria baicalensis. Its structure was established on the basis of spectral evidences.     

高铁酸盐在SnO2-Sb2O3/Ti电极上的选择性电化学合成

合成了SnO2-Sb2O3/Ti电极材料.实验结果证实,在14mol/LNaOH水溶液中和完全避免析氧反应的条件下,Fe(Ⅱ)物种在该电极上进行电化学氧化并生成FeO42-.结果表明,Fe(OH)3在浓NaOH溶液中发生酸式电离,形成可溶于水的FeO2-,该离子的浓度随着碱溶液浓度变化而发生明显变化,而且它还是发生化学氧化和电化学氧化的反应物.在SnO2-Sb2O3/Ti电极上,FeO42-的电化学还原起始电位为0.38V(vs.Hg/HgO,14mol/LNaOH),FeO2-电化学氧化起始电位为0.54V.结果还表明,用电化学方法氧化Fe(Ⅱ)物种生成FeO42-是个多步骤过程.     

破碎-絮凝法分离细长碳纳米管与碳纤维

根据碳纤维与细长碳纳米管耐磨性能与絮凝沉降性能的差异，提出了一种有效分离细长碳纳米管与碳纤维的物理方法——破碎-絮凝法.该方法包括研磨破碎、液相分散、絮凝沉降、过滤分离等步骤，可高效去除混杂于细长碳纳米管样品中的碳纤维，同时还可去除螺旋状碳纤维及细小碳颗粒等易悬浮杂质.纯化过程对细长碳纳米管无损伤.用电子显微镜和热重分析表征了纯化效果，并初步分析了纯化机理.     

CURING KINETICS AND PROPERTIES OF ACRYLIC RESIN CURED WITH AZIRIDINE CROSSLINKER

A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinkingproperties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in theemulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transitiontemperature (T_g) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kineticsstudied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low(65.1 kJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and canbe used at room temperature.     

A Novel Plasticizer for the Preparation of Thermoplastic Starch

TPS was a biodegradable material based on starch. Starch was an inexpensive and natural renewable polysaccharide, which was widely investigated as the substitute of petroleum-derived plastics. Native starch commonly existed in granule structure with about…